Changes to Step #15
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [title] Y bearings installation |
|---|---|
| + | [title] Y bearings installation - MK2(S)/MK2.5(S) |
| [* 5] Locate the marker of the Y carriage. | |
| [* 7] Flip the carriage to have the marker facing the table (not visible anymore on the 2nd and 3rd image). | |
| [* 2] The ''y_bearing_holders'' have 2 dots printed on one of their corners. Place the 3x ''y_bearing_holders'' with the dots oriented as shown on the 2nd image. | |
| [* 6] Secure the bearing holders with 6x M3x25 screws. Do ***NOT*** tighten yet! |