Changes to Step #17
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Y smooth rods installation |
|---|---|
| [* 3] Gently insert 2x Y axis smooth rods (330mm long). | |
| [* 9] Don't force during insertion. | |
| [* 9] Don't rotate the smooth rods, the LM8UU bearings are not made to rotate. | |
| [* 5] Loosen the M5 screws of the 2x right ''y_rod_holders''. You should be able to slide them freely by hands. | |
| [* 7] Clip the Y smooth rods and carriage assembly on the ''y_rod_holders''. The Single bearing should be to the right. | |
| [* 2] Verify the marker of the carriage is correctly positioned. If this is not the case, verify your assembly with the previous steps. | |
| [* 9] It is very important to have the LM8UU bearings correctly oriented as well as the marker or you will have issue later in the assembly. |