Changes to Step #31

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Y smooth rods installation - MK3(S)
[* 3] Gently insert 2x Y axis smooth rods (330mm long).
- [* 9] Don't force during insertion.
+ [* 9] You must not use any significant force whilst inserting the rods into the linear bearings.
[* 9] Don't rotate the smooth rods, the LM8UU bearings are not made to rotate.
-[* 5] Loosen the M5 screws of the 2x right ''y_rod_holders''. You should be able to slide them freely by hands.
-[* 7] Clip the Y smooth rods and carriage assembly on the ''y_rod_holders''. The Single bearing should be to the right.
-[* 9] It is very important to have the LM8UU bearings correctly oriented or you will have issue later in the assembly.
+[* 5] Loosen the M5 screws of the 2x right ''y_rod_holders''. You should be able to slide them easily by hand.
+[* 7] Clip the Y smooth rods and carriage assembly into the ''y_rod_holders''. The Single bearing should be to the right.
+[* 9] It is very important to have the LM8UU bearings correctly oriented or you will have issues later in the assembly.