Changes to Step #9
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Prepare the following parts: |
|---|---|
| + | [* 1] 1x Idler |
| + | [* 1] 1x Y axis belt |
| + | [* 1] 1x ''y_idler_tensioner'' |
| + | [* 1] 1x dowel pin |
| + | [* 1] Place the belt around the idler and insert it into the y_idler_tensioner. |
| + | [* 1] Insert the dowel pin from the right side. Make sure the dowel pin is fully inserted and does not stick out of the ''y_idler_tensioner'' |
| + | [* 1] Reserve for later use. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added