Changes to Step #9

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Prepare Y idler tensioner
[* 1] Prepare the following parts:
- [* 6] 1x idler with Y axis belt around it.
+ [* 6] 1x 20T idler with Y axis belt looped around it.
[* 2] 1x ''y_idler_tensioner'' printed part.
[* 5] 1x dowel pin.
[* 7] Place the belt around the idler and insert it into the y_idler_tensioner.
[* 2] Insert the dowel pin from the right side. Make sure the dowel pin is fully inserted and does not stick out of the ''y_idler_tensioner''
-[* 1] Reserve the ''y_idler_tensioner'' for later use.
+[* 1] Keep the ''y_idler_tensioner'' for use later.