Changes to Step #21
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 7] Remove M3x25 from the ''y_idler_mount'' and add a washer. |
|---|---|
| + | [* 5] Place the ''y_idler_tensioner'' and screw back the M3x25 with its washer |
| + | [* 2] Insert an M3 locknut to the left side of the ''y_idler_mount'' and screw an M3x30 from the other side. Use the screw to help the locknut going in its cavity. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added