Changes to Step #19
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [* 4] 47mm front |
|---|---|
| - | [* 6] 61.5mm back |
| + | [* 1] Set the ''y_idler_mount'' and ''y_motor_mount'' position as following: |
| + | [* 4] 47mm for the ''y_idler_mount''. |
| + | [* 6] 61.5mm for the ''y_motor_mount''. |