Skip to main content

Changes to Step #19

Edit by Ian Middleton

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

-[title] Y axis parts positionning - MK2(S)/MK2.5(S)
+[title] Y axis parts positioning - MK2(S)/MK2.5(S)
[* 1] Set the ''y_idler_mount'' and ''y_motor_mount'' position as following:
[* 4] 47mm for the ''y_idler_mount''.
[* 6] 61.5mm for the ''y_motor_mount''.
[* 10] We will adjust these positions, if necessary, after the belt is in place and tensioned.