Changes to Step #33
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [title] Y axis parts positionning |
|---|---|
| + | [title] Y axis parts positionning - MK3(S) |
| [* 1] Set the ''y_idler_mount'' and ''y_motor_mount'' position as following: | |
| [* 4] 51mm for the ''y_idler_mount''. | |
| [* 6] 48mm for the ''y_motor_mount''. | |
| [* 10] We will improve those positions later when the belt will be in place. |