Changes to Step #33

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Y axis parts positionning - MK3(S)
[* 1] Set the ''y_idler_mount'' and ''y_motor_mount'' position as following:
[* 4] 51mm for the ''y_idler_mount''.
[* 6] 48mm for the ''y_motor_mount''.
-[* 10] We will improve those positions later when the belt will be in place.
+[* 10] We will adjust these positions, if necessary, after the belt is in place and tensioned.