Changes to Step #33

Edit by Matthew Van Zante —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

-[title] Y axis parts positionning - MK3(S)
+[title] Y axis parts positioning - MK3(S)
[* 1] Set the ''y_idler_mount'' and ''y_motor_mount'' position as following:
[* 4] 51mm for the ''y_idler_mount''.
[* 6] 48mm for the ''y_motor_mount''.
[* 10] We will adjust these positions, if necessary, after the belt is in place and tensioned.