Changes to Step #34
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [title] Y belt holder installation |
|---|---|
| + | [title] Y belt holder installation - MK3(S) |
| [* 7] Install the ''y_belt_holder'' under the Y carriage with 2x M3x10 (reused from your original Prusa). The grooves should face the dual bearings side. | |
| [* 9] Verify the orientation of the ''y_belt_holder''. |