Changes to Step #22
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [* 5] Unscrew the idler tensioner screw a little to make a small opening (around 3mm). | |
| - | [* 6] Unscrew the clamp of the y_belt_holder to help the insertion of the belt in the next step. |
| + | [* 6] Unscrew the clamp of the ''y_belt_holder'' to help the insertion of the belt in the next step. |