Changes to Step #22

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Y belt preparation - MK2(S)/MK2.5(S)
-[* 5] Unscrew the idler tensioner screw a little to make a small opening (around 3mm).
+[* 5] Unscrew the idler tensioner screw until there is a small gap (around 3mm).
[* 6] Unscrew the clamp of the ''y_belt_holder'' to help the insertion of the belt in the next step.