Changes to Step #24
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 7] Apply a light tension on the belt to avoid having it being floppy. Do not over-tighten the belt or the adjustments will be impossible. |
|---|---|
| + | [* 10] we will adjust precisely the belt tension in a later step. |
| + | [* 5] Adjust the position of ''y_idler_mount'' and ''y_motor_mount'' using their M5 screws. Try to have the belt ridding as centered as possible on the pulley (motor side) and the idler (tensioner side). |
| + | [* 2] It is important to move the Y carriage back and forth along the whole axis between each adjustment. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added