Changes to Step #3

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Z motor mounts preparation
[* 7] Insert 2x M5x10 screws in the ''z_motor_mount''.
-[* 5] Engage 2x t-nuts on the M5 screws (1-2 turns) and place them vertically.
+[* 5] Thread 2x t-nuts on the M5 screws (1-2 turns) and place them vertically.
[* 1] Repeat with the remaining ''z_motor_mount''.