Changes to Step #2
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 2] Make sure you have remove the original lead screw covers as specified in the [guide|42|preflight check and disassembly|stepid=470] guide |
|---|---|
| + | [* 10] This is not optional, the original ones are not compatible with the Bear Z motor mounts. |
| + | [* 5] Screw the Bear ''z_leadscrew_cap'' on both steppers. |
| + | [* 9] The ''z_leadscrew_caps'' should screw down to the Z motor but should not be tight at all. Make sure the lead screw can turn freely. |
Image 1
No previous image
Added
Image 2
No previous image
Added