Changes to Step #6
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 1] If you still have the X carriage (or extruder) in place you must release the belt tension. |
|---|---|
| + | [* 4] ***Bear extruder and X axis (BearExxa), BearMera of Bear X axis with Bondtech extruder:*** release tension using the tensioning screws. |
| + | [* 7] ***Original Prusa MK3(S):*** remove the 2x top motor screw and release tension of the screw on the X motor arm. Then rotate the X motor. |
| + | [* 7] ***Original Prusa MK2(S) or MK2.5(S):*** remove the 2x top motor screw and rotate the X motor. |
Image 1
No previous image
Added
Image 2
No previous image
Added