Changes to Step #8
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 7] Insert 2x M5x10 screws in one of the ''z_top''. |
|---|---|
| + | [* 5] Engage 2x t-nuts on the M5 screws (1-2 turns) and place them vertically. |
| + | [* 1] Repeat with the remaining ''z_top''. |
Image 1
No previous image
Added
Image 2
No previous image
Added