Changes to Step #8

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Z tops preparation
[* 7] Insert 2x M5x10 screws in one of the ''z_top''.
-[* 5] Engage 2x t-nuts on the M5 screws (1-2 turns) and place them vertically.
+[* 5] Thread 2x t-nuts on the M5 screws (1-2 turns) and place them vertically.
[* 1] Repeat with the remaining ''z_top''.