Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Heated bed assembly - MK2(S) | |
| - | [* 8] Remove the two temporary hex nuts from the Y carriage. Keep the M3x12 screws of the ''y_belt_holder'' in place. |
| + | [* 8] Remove the two temporary hex nuts from the Y carriage and ***save them for later use***. Keep the M3x12 screws of the ''y_belt_holder'' in place. |
| [* 5] Place the heated bed on the Y carriage. |