Changes to Step #15
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Prepare the following hardware: |
|---|---|
| + | [* 3] 9x M3x12 or M3x14 flat head screws (reused from your Original Prusa). |
| + | [* 7] 9x spacers 5.5x6x3 (reused from your Original Prusa). |
| + | [* 8] Move the bed to the front |
| + | [* 4] Locate the center hole of the Y carriage. |
| + | [* 5] Place a spacer on the carriage's center hole. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added