Changes to Step #15
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Prepare heated bed assembly - MK3(S) |
|---|---|
| [* 1] Prepare the following hardware: | |
| [* 3] 9x M3x12 or M3x14 flat head screws (reused from your Original Prusa). | |
| [* 7] 9x spacers 5.5x6x3 (reused from your Original Prusa). | |
| [* 5] 1x 2mm Allen key. | |
| [* 8] Move the Y carriage to the front. | |
| [* 4] Locate the center hole of the Y carriage. | |
| [* 6] Place 1x spacer on the hole of the Y carriage. |