Changes to Step #16
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [* 3] Insert the hex key in the center hole of the heated bed |
|---|---|
| + | [* 3] Insert the hex key in the center hole of the heated bed. |
| [* 6] Place the heated bed with the hex key on the printer. Align the bed with the spacer and the center hole of the Y carriage using the hex key. | |
| [* 5] Add one of the M3 flat head screw and secure the bed in the center. To do tighten the screw completely yet. |