Changes to Step #16
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Heated bed assembly - MK3(S) |
|---|---|
| [* 3] Take your heated bed and insert the hex key in the centeral hole. | |
| [* 6] Place the heated bed with the hex key on the Y carriage. Align the bed with the spacer and the centeral hole of the Y carriage using the hex key. | |
| [* 5] Add one of the M3 flat head screw and secure the bed in the center. To do tighten the screw fully yet. |