Changes to Step #16

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Heated bed assembly - MK3(S)
[* 3] Take your heated bed and insert the hex key in the centeral hole.
[* 6] Place the heated bed with the hex key on the Y carriage. Align the bed with the spacer and the centeral hole of the Y carriage using the hex key.
-[* 5] Add one of the M3 flat head screw and secure the bed in the center. To do tighten the screw fully yet.
+[* 5] Add one of the M3 flat head screws and secure the bed in the centre. Do not fully tighten the screw yet.