Changes to Step #17
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Heated bed assembly - MK3(S) |
|---|---|
| [* 7] From the right of the bed (or left if you are left-handed), insert a second spacer between the Y carriage and the heated bed. Use a plier to make the insertion easier. | |
| [* 5] Use the 2mm hex key to align the spacer. | |
| [* 8] Secure the bed and spacer using one of the M3 flat head screws. Do not tighten fully yet. |