Changes to Step #17

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Heated bed assembly - MK3(S)
-[* 7] From the right of the bed (or left if you are left-handed), insert a second spacer between the Y carriage and the heated bed. Use a plier to make the insertion easier.
+[* 7] From the right of the bed (or left if you are left-handed), insert a second spacer between the Y carriage and the heated bed. Use needle nosed pliers to make the insertion easier.
[* 5] Use the 2mm hex key to align the spacer.
[* 8] Secure the bed and spacer using one of the M3 flat head screws. Do not tighten fully yet.