Changes to Step #18
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 4] Continue with the 7 other points of the heated bed. |
|---|---|
| + | [* 9] Make sure no screw are fully tighten or you might warp the heated bed. |
| + | [* 1] Fully tighten the M3 flat head screws ***incrementally*** in this precise orders: |
| + | [* 7] 1st center screw. |
| + | [* 5] 2nd corner screws. |
| + | [* 3] 3rd side screws. |
| + | [* 1] Repeat until all screw are fully tighten. |
Image 1
No previous image
Added
Image 2
No previous image
Added