Changes to Step #18

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Heated bed assembly - MK3(S)
[* 4] Continue with the 7 other points of the heated bed.
- [* 9] Make sure no screw are fully tighten or you might warp the heated bed.
-[* 1] Fully tighten the M3 flat head screws ***incrementally*** in this precise orders:
+ [* 9] Make sure no screw is fully tightened or you may warp the heated bed.
+[* 1] Fully tighten the M3 flat head screws ***evenly and incrementally*** in this precise order:
[* 7] 1st center screw.
[* 5] 2nd corner screws.
[* 3] 3rd side screws.
- [* 1] Repeat until all screw are fully tighten.
+ [* 1] Repeat until all screws are fully tightened.