Changes to Step #4

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

+[title] PSU type
[* 1] The next steps are for the Prusa ***silver PSU only***.
-[* 1] If you have the Prusa ***black PSU***, go to ***step xxx***
+ [* 1] If you have the Prusa ***black PSU***, go to *** [guide|49|step 11|stepid=613]***
[* 10] If you don't know which PSU you have, please check the second image.
[* 3] Prusa black PSU
[* 7] Prusa silver PSU
[* 10] Image copyright: [https://help.prusa3d.com/en/guide/6-lcd-assembly_31472#31904|Prusa Research]