Changes to Step #6
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] PSU lower mount assembly - Silver PSU |
|---|---|
| + | [* 10] The ''psu_lower_mount'' in this step is slightly different between MK2(S)/MK2.5(S) and MK3(S) but they have the same functionality and assembly. |
| + | [* 7] Take the ''psu_lower_mount'' and insert a square nut. |
| + | [* 8] Slide 1x t-nut on the back extrusion from the right side of the frame. |
| + | [* 5] Assemble the ''psu_lower_mount'' with 1x M5x10 screw. Don't tighten fully yet as it will need some repositioning. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added