Changes to Step #6

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] PSU lower mount assembly - Silver PSU
-[* 10] The ''psu_lower_mount'' in this step is slightly different between MK2(S)/MK2.5(S) and MK3(S) but they have the same functionality and assembly.
+[* 10] The ''psu_lower_mount'' in this step is slightly different for MK2(S)/MK2.5(S) and MK3(S) but they have the same functionality and assembly.
[* 7] Take the ''psu_lower_mount'' and insert a square nut.
-[* 8] Slide 1x t-nut on the back extrusion from the right side of the frame.
+[* 8] Slide 1x t-nut into the lower channel of the rear extrusion, from the right side of the frame.
[* 5] Assemble the ''psu_lower_mount'' with 1x M5x10 screw. Don't tighten fully yet as it will need some repositioning.