Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] PSU installation - Silver PSU |
|---|---|
| + | [* 6] Rotate the frame to the right side. Be careful with the extruder, help him going down slowly. |
| + | [* 8] Slide 2x t-nuts from the top of the frame. |
| + | [* 5] Place the PSU and secure it with 2x M5x10 screws. Do not tighten fully yet. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added