Changes to Step #2
Edit by Michael Marbut —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Trapezoidal nuts adjustment | |
| - | [* 1] Turn |
| + | [* 1] Turn off the printer if it is powered on. |
| [* 1] Place a piece of paper on the heated bed to protect it. | |
| [* 1] Plug and turn on the printer. | |
| [* 6] Using the screen menu, move the X axis up until it crashes in the Z tops. | |
| [* 5] Turn the lead screws by hand to ensure both side are applying more even pressure to the Z tops. You might feel a step moving, on one side or both. | |
| [* 4] Move the Z axis down to approximately 10-15mm from the heated bed. |