Changes to Step #3

Edit by Matthew Harrison —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Trapezoidal nuts adjustment
[* 1] If you have applied tension to the belt, unscrew the belt tensioner on ''x_end_idler'' until the belt is relaxed.
-[* 7] Unscrew a little the trapezoidal nuts.
+[* 7] Slightly unscrew the trapezoidal nuts.
[* 4] Make sure the trapezoidal nuts are moving freely.
[* 5] Tighten again the 4 screws alternatively (on both sides). Don't apply lateral force on the trapezoidal nuts.