Changes to this Step
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Print extruder calibration cube |
|---|---|
| + | [* 1] Set the following print settings: |
| + | [* 8] Perimeters: 1 |
| + | [* 5] Solid layer top and bottom: 0 |
| + | [* 6] Infill: 0% |
| + | [* 1] Slice and print your cube. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added