Changes to Step #8

Edit by Matthew Harrison —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Selftest and PID calibration
[* 1] Turn on the printer.
[* 5] Run the self test in calibration settings.
[* 9] If selftest ends with error, correct them before going further.
-[* 6] In Settings -> Temperature -> Fan speed set a value at 130 if you print lots of PETG and 255 if you print lots os PLA. For other material select according to your most used filament.
+[* 6] In Settings -> Temperature -> Fan speed set a value at 130 if you print lots of PETG and 255 if you print lots of PLA. For other materials, select according to your most used filament.
[* 7] Run PID calibration in calibration settings.
-[* 7] Choose a temperature that match your most used printing temperature.
+[* 7] Choose a temperature that matches your most used printing temperature.