Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 10] The placement of the cable clips doesn't need to be very precise (unless you have a strong OCD :D ). |
|---|---|
| + | [* 7] Install 2x ''cable_clip_lcd'' on the front extrusion with the following distances: |
| + | [* 4] 30mm |
| + | [* 5] 10mm |
| + | [* 8] Install the 3 remaining ''cable_clip_lcd'' on the side with the following distances: |
| + | [* 6] 30mm |
| + | [* 3] 50mm |
Image 1
No previous image
Added
Image 2
No previous image
Added