Changes to Step #4
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Sides cable clips installation |
|---|---|
| [* 5] Install 1x ''cable_clip_vertical'' under the left Z motor at ***10mm*** from the joining plate. | |
| [* 8] Install 1x ''cable_clip_horizontal'' spaced by ***25mm*** from the other side of the joining plate. | |
| [* 7] Repeat this step under the other Z motor with the same distances. |