Changes to Step #5
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [* 10] This step is for ***MK2(S) or MK2.5(S) only***. | |
| [* 1] For Prusa MK3(S) with silver PSU go to the next step. | |
| [* 1] For Prusa MK3(S) with black PSU go to step xxx | |
| [* 8] Install 4x cable_clip_vertical on the back of the frame. Space them equally as shown in yellow and blue. | |
| + | [* 1] Go to step xxx |