Changes to Step #5

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[* 10] This step is for ***MK2(S) or MK2.5(S) only***.
[* 1] For Prusa MK3(S) with silver PSU go to the next step.
[* 1] For Prusa ***MK3(S) with black PSU*** go to [guide|50|step 7|stepid=624].
[* 8] Install 4x ''cable_clip_vertical'' on the back of the frame. Space them equally as shown in yellow and blue.
-[* 1] Go to step xxx
+[* 1] Go to [guide|50|step 8|stepid=626].