Changes to Step #5
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [title] MK2(S) or MK2.5(S) |
|---|---|
| + | [title] MK2(S) or MK2.5(S) step |
| [* 10] This step is for ***MK2(S) or MK2.5(S) only***. | |
| [* 1] For Prusa ***MK3(S) with silver PSU*** go to the next step. | |
| [* 1] For Prusa MK3(S) with ***black PSU*** go to [guide|50|step 7|stepid=624]. | |
| [* 8] Install 4x ''cable_clip_vertical'' on the back of the frame. Space them equally as shown in yellow and blue. | |
| [* 1] Go to [guide|50|step 8|stepid=626]. |