Changes to Step #5

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] MK2(S) or MK2.5(S) step
-[* 10] This step is for ***MK2(S) or MK2.5(S) only***.
- [* 1] For Prusa ***MK3(S) with silver PSU*** go to the next step.
- [* 1] For Prusa MK3(S) with ***black PSU*** go to [guide|50|step 7|stepid=624].
-[* 8] Install 4x ''cable_clip_vertical'' on the back of the frame. Space them equally as shown in yellow and blue.
+[* 10] This step is for the ***MK2(S) or MK2.5(S) only***.
+ [* 1] For the Prusa ***MK3(S) with a silver PSU*** go to the next step.
+ [* 1] For the Prusa MK3(S) with a ***black PSU*** go to [guide|50|step 7|stepid=624].
+[* 8] Install 4x ''cable_clip_vertical'' on the back of the frame. Space them evenly as shown in the image.
[* 1] Go to [guide|50|step 8|stepid=626].