Changes to Step #6

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

-[* 1] This step is for ***MK3(S) with silver PSU only***.
+[* 10] This step is for ***MK3(S) with silver PSU only***.
[* 1] For Prusa MK2(S) or MK2.5(S) go to step xxx
[* 1] For Prusa MK3(S) with black PSU go to the next step
+[* 8] Install 4x ''cable_clip_vertical'' on the back of the frame as following:
+ [* 4] 35mm.
+ [* 6] Equally separated.