Changes to Step #6
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [title] |
|---|---|
| + | [title] MK3(S) silver PSU step |
| [* 10] This step is for ***MK3(S) with silver PSU only***. | |
| [* 1] For Prusa ***MK2(S) or MK2.5(S)*** go to [guide|50|step 5|stepid=622]. | |
| [* 1] For Prusa MK3(S) with ***black PSU*** go to the next step | |
| [* 8] Install 4x ''cable_clip_vertical'' on the back of the frame as following: | |
| [* 4] Separated by 35mm. | |
| [* 6] Equally spaced. | |
| [* 1] Go to [guide|50|step 8|stepid=626]. |