Changes to Step #6

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] MK3(S) silver PSU step
[* 10] This step is for the ***MK3(S) with silver PSU only***.
[* 1] For a Prusa ***MK2(S) or MK2.5(S)*** go to [guide|50|step 5|stepid=622].
[* 1] For the Prusa MK3(S) with a ***black PSU*** go to the next step
[* 8] Install 4x ''cable_clip_vertical'' on the back of the frame as shown:
[* 4] Spaced at 35mm intervals.
[* 6] Equally spaced.
-[* 1] Go to [guide|50|step 8|stepid=626].
+[* 1] Go to [guide|50|step 8|stepid=627].