Changes to Step #7

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[* 10] This step is for ***MK3(S) with black PSU only***.
[* 1] For Prusa ***MK2(S) or MK2.5(S)*** go to [guide|50|step 5|stepid=622]
[* 1] For Prusa ***MK3(S) with silver PSU*** go to [guide|50|step 6|stepid=623].
[* 8] Install 4x ''cable_clip_vertical'' on the back of the frame as following:
[* 4] Separated by 35mm.
- [* 6] Equally separated.
+ [* 6] Equally spaced.