Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] MK3(S) black PSU step |
|---|---|
| [* 10] This step is for ***MK3(S) with black PSU only***. | |
| [* 1] For Prusa ***MK2(S) or MK2.5(S)*** go to [guide|50|step 5|stepid=622] | |
| [* 1] For Prusa ***MK3(S) with silver PSU*** go to [guide|50|step 6|stepid=623]. | |
| [* 8] Install 4x ''cable_clip_vertical'' on the back of the frame as following: | |
| [* 4] Separated by 35mm. | |
| [* 6] Equally spaced. |