Changes to Step #7

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] MK3(S) black PSU step
-[* 10] This step is for ***MK3(S) with black PSU only***.
- [* 1] For Prusa ***MK2(S) or MK2.5(S)*** go to [guide|50|step 5|stepid=622]
- [* 1] For Prusa ***MK3(S) with silver PSU*** go to [guide|50|step 6|stepid=623].
-[* 8] Install 4x ''cable_clip_vertical'' on the back of the frame as following:
- [* 4] Separated by 35mm.
+[* 10] This step is for the ***MK3(S) with black PSU only***.
+ [* 1] For a Prusa ***MK2(S) or MK2.5(S)*** go to [guide|50|step 5|stepid=622]
+ [* 1] For a Prusa ***MK3(S) with silver PSU*** go to [guide|50|step 6|stepid=623].
+[* 8] Install 4x ''cable_clip_vertical'' on the back of the frame as shown:
+ [* 4] Spaced at 35mm intervals.
[* 6] Equally spaced.